IGET BAR PLUS S3 Kit Passion Fruit Blueberry Raspberry

IGET Bar Plus S3 Kit 10000 Puffs Disposable Vape in Passion Fruit Blueberry Raspberry

The IGET Bar Plus S3 Kit is one of the more interesting shapes the disposable vape market has taken in Australia. Instead of a sealed unit that gets thrown away once the taste runs out, the S3 pairs a rechargeable battery body with a replaceable pod, so the part you hold onto keeps working while the part you taste gets swapped. This page is focused on the Passion Fruit Blueberry Raspberry version, which is the Kit format, meaning the device and the selected pod are supplied together and the setup is complete from the start.

For Australian customers who were raised on the idea that a disposable vape is a single use purchase, that difference matters more than any number on the box. The IGET Bar Plus S3 10000 pod is rated for up to 10000 puffs, but when that pod is finished you replace the pod rather than the whole device. Over the life of a device you own, the maths is straightforward and the cost per 1000 puffs is far lower than buying a new sealed disposable each time it runs dry.

What is actually inside the IGET Bar Plus S3 Kit

This listing is sold in the Kit format, so the rechargeable S3 device and the Passion Fruit Blueberry Raspberry pod are supplied as one package. There is no separate device purchase needed to get started, and no separate pod purchase either. Click the pod into the magnetic base, and the unit is ready to draw from.

That said, understanding the three parts of the S3 range will save you buying the wrong thing later, because the catalog is split across Kit, Pod and Device Only listings. The Kit is the complete starting setup. The Pod listing is for customers who already hold a working S3 or BAR PLUS device and simply want a different taste. The Device Only listing is the battery body on its own, with no pod included, and it will not run without a compatible pod fitted.

If you are buying your first S3, the Kit is the option that gets you from unboxing to first draw without a second order. If you already own the device, the Pod is the lower cost repeat purchase and the format most regular S3 users reorder.

The Passion Fruit Blueberry Raspberry taste profile

Passion Fruit Blueberry Raspberry is a three fruit berry option, and the reason it works is that none of the three fruits dominates long enough to become tiring. The passion fruit brings a bright, lightly acidic top note that lifts the whole profile, the blueberry sits in the middle as the soft and rounded body, and raspberry carries a sharper, more aromatic finish that lingers after the draw.

How the three tastes build on each other

Many berry blends taste flat because every note sits at the same intensity, which is what makes them tiring after a few hundred draws. This option avoids that by giving each fruit a different job. Passion fruit does the lifting, blueberry does the smoothing, raspberry does the finishing. The result is a layered profile that reads as fruit rather than as sugar, and it holds its shape well across the life of the pod.

Who this option suits

This is a good option for customers who find heavy menthol options too harsh through the day but also find plain fruit options a bit flat. There is no ice or cooling element in this profile, so the taste sits entirely on the fruit side, which makes it a comfortable all day choice for anyone who prefers their sessions smooth rather than sharp.

It is also a sensible first S3 option for a customer who is not sure which taste they like yet. Berry based profiles with some acidity tend to be the easiest place to start, because the result is recognisably fruit without being committed to a single strong note.

IGET Bar Plus S3 Kit specifications

Where the Kit sits against the other S3 formats

Choosing between the three S3 listings is mostly a question of what you already own. The comparison below covers the realistic decision points.

Understanding the numbers on the box

What 10000 puffs actually means day to day

Puff counts are measured under a laboratory draw rate, so it is better to treat 10000 puffs as a capacity band rather than an exact count. As a practical guide for Australian users, a moderate daily user will get several weeks from a single pod, while a heavier user will see it finish sooner. The point to hold onto is the structure rather than the exact figure, because the pod is replaceable and the device is not consumed with it.

Why the 950 mAh battery and Type C charging matter

The 950 mAh rechargeable battery is sized to run a pod through rather than to be charged constantly. Type C is worth noting because it is the cable format most Australian households already own, so a lost or damaged cable is an easy, low cost fix. Because the body stays with you across many pods, the battery cost is spread over a long period instead of being thrown away with a sealed device.

What the 1.0 ohm mesh coil does

A mesh coil has a larger contact surface than a traditional round wire coil, which means the contents are heated more evenly across the whole surface. In practice that shows up as a taste that stays consistent rather than drifting, and fewer burnt or harsh draws late in the life of a pod. At 1.0 ohm it is also a moderate draw resistance, which suits mouth to lung use.

Reading the smart screen

The built in screen displays battery status, which removes the most common frustration with rechargeable devices, namely not knowing whether the device is flat or finished. A quick glance before you leave the house is enough to confirm you have power for the day.

Getting the most from your S3 pod

A few small habits make a noticeable difference to how long a pod lasts and how consistent it tastes. Take lighter draws for the first few puffs after fitting a new pod, which gives the coil time to settle and reduces the chance of a sharp first hit. Keep the magnetic contact points clean with a dry cotton swab whenever you change pods, because a build up of residue there is a common cause of inconsistent power. Charge the device before the screen shows a low level rather than waiting until it cuts out, and store the device somewhere cool and out of direct sunlight, which matters during an Australian summer.

Why BestVapeAU

BestVapeAU is an Australia focused online product catalogue designed for individual customers, with a focus on clear information, straightforward pricing and easy navigation. We feature product information for brands such as IGET, HQD, RELX and BIMO, helping visitors explore different models, compare specifications and understand individual product options.

In practice that means every listing explains what is actually in the package, which is the single most useful piece of information when you are choosing between a Kit, a Pod and a Device Only. We stock the IGET Bar Plus S3 range locally, we sell single units with one item minimum, and we dispatch from our Australian warehouse, so orders reach customers across the country quickly without a long international wait.

Frequently asked questions about the Passion Fruit Blueberry Raspberry S3

Does the Kit come with a pod ready to use?

Yes. The Kit format supplies the rechargeable device together with the Passion Fruit Blueberry Raspberry pod, so it works straight out of the box. If you already own a compatible S3 or BAR PLUS device, the Pod listing is the lower cost repeat purchase.

Is this option sweet or more tart?

It sits in the middle. The passion fruit adds a light acidity on the inhale, the blueberry keeps the body soft and rounded, and the raspberry leaves a sharper, more aromatic finish. It reads as fresh fruit rather than as a pure sugar sweet, which is why it works well across a full day.

Does it have a cooling or ice finish?

No. There is no menthol or ice element in this profile, so the taste stays on the fruit side from start to finish. If you prefer something sharper, the Blackberry Ice and Grape Ice options in the same range are the ones to look at instead.

Do I need to charge it before the first draw?

The device arrives with a battery that can be checked on the smart screen, and Type C charging means you can top it up with a cable you already own. The screen shows battery status, so there is no need to guess whether it is ready.

Can I buy only the pod for my existing device?

Yes, and that is the intended way to use the range once you own a device. The S3 device is also compatible with the earlier BAR PLUS 6000 puffs pod, so an existing BAR PLUS setup can be used with either pod capacity.

How long does delivery take?

Orders are dispatched from our Australian warehouse, so there is no international shipping leg. Metro deliveries typically arrive within a few business days, and regional areas follow shortly after.

Ordering the IGET Bar Plus S3 Kit in Australia

Ready to buy disposable vapes online in Australia? Visit BestVapeAU at bestvapeau.com to explore the full IGET range, compare specifications across the Kit, Pod and Device Only formats and order with straightforward pricing. We sell single units with one item minimum, and orders ship from local stock, so delivery across Australia is quick. If you are still deciding, the Passion Fruit Blueberry Raspberry Kit is an easy first S3 purchase because the device and the pod arrive together and the setup needs no extra parts.

This product is intended for use by adults aged 21 and over only. BestVapeAU ships from an Australian local warehouse with fast dispatch. Please vape responsibly and keep devices away from children and pets.