IGET Bar Plus S3 Device Only (No Pod)
This listing is the IGET Bar Plus S3 device on its own, with no pod included. It is the rechargeable body that the Bar Plus S3 pods click into, sold separately for anyone who already has pods at home, wants a second or spare device, or simply prefers to choose the flavour themselves. The body is reusable, so this is the part you keep while pods come and go.
Buying the device alone is a common choice once you already know which pod flavours you like. Rather than paying for a kit that includes one pod you might not want, you buy the body and pair it with exactly the flavour you are after. This page explains what is included, which pods fit, how to charge and set it up, and how it compares with the kit and pod listings.
What is included
The box contains the IGET Bar Plus S3 rechargeable device only. No pod is supplied, and nothing is pre installed, so the device arrives ready to be paired with a pod of your choosing. Everything else you need to get started is built into the body: the rechargeable battery, the Type C charging port, the smart display and the magnetic pod connection. Once you have a compatible pod, the setup takes seconds.
Device specifications
| Specification | Detail |
|---|---|
| Brand | IGET |
| Series | Bar Plus S3 |
| Type | Rechargeable device, pod not included |
| Battery | Rechargeable, USB Type C charging |
| Display | Smart screen showing battery level |
| Connection | Magnetic pod fit, no tools needed |
| Pods supported | Bar Plus S3 10000 puff pods and BAR PLUS 6000 puff pods |
| Activation | Draw activated, no button needed |
| Included in box | Device only, no pod supplied |
Which pods fit this device?
The Bar Plus S3 body is built for the Bar Plus S3 pod range, which is rated at up to 10000 puffs. It also accepts the earlier BAR PLUS pods, which are rated at up to 6000 puffs. That backward compatibility is worth knowing, because it means an older 6000 puff pod you still have will work fine on the newer body, and you can move between the two pod sizes as you like.
What the device will not do is accept a pod from any other brand, so always match IGET pods to an IGET body. If you are unsure which pod you have, check the label before ordering. Once a pod is seated, the magnetic connection holds it firmly in place and the device activates automatically as you draw, so there is nothing to switch on or adjust.
Setting it up and charging
Getting started takes a couple of minutes. Pull the device from the box, charge it through the Type C port until the smart screen shows a full battery, then remove any film from your pod and click it into the magnetic base until it seats. Draw lightly for the first few puffs so the mesh coil settles, and after that the device responds automatically to every draw. There are no settings to configure and no buttons to press, which keeps day to day use simple.
Charging is the one routine task, and the smart display makes it easy, since the battery level is always visible rather than being a guess. Top the body up before the level gets low, and a spare charge cable kept at home or work covers most situations. Because the battery lives in the body rather than in the pod, charging carries over when you change flavours: you swap the pod, not the power source, so a fresh pod never means a dead device.
Device only compared with the Kit
The Kit is the same body with a pod included, so it is the better starting point if you do not yet own a pod or want to try a specific flavour straight away. This listing is the device alone, so it costs less but expects you to supply the pod. Choose the Kit for your first purchase and the device only when you already have pods, or simply want a second body.
Best for: Kit suits a first buy, this listing suits owners with pods already.
Device only compared with a replacement pod
They are two halves of the same system, so it helps to know which one you actually need. A replacement pod is the consumable part: it holds the flavour and reaches its rated puff count, then it is replaced. The device is the reusable part: it holds the battery and the screen and keeps working across many pods. Buy the pod when your current flavour runs out, and this device when you need the body that powers it.
Best for: pods suit routine restocking, the device suits a spare or replacement body.
Why a spare device makes sense
Since the body is the part that can be charged and reused indefinitely, a second one is a practical purchase rather than a wasteful one. Keep one charging at home and one in a bag, so you are never stuck with a flat battery and a full pod. If a device is dropped or lost, the pods you already own are not wasted either, because a replacement body puts them straight back into use. At this price point, having a spare on hand costs less than replacing a kit does, and it removes the most common reason people run short.
Looking after the device
The body needs very little maintenance. Wipe the two contact points in the base with a dry cotton swab each time you change a pod, because residue there is the most common cause of power dropping between pods. Keep the Type C port clear of lint and dust, and avoid leaving the device in a hot car or on a sunny windowsill, since heat is what ages a battery fastest. Stored sensibly, a body will keep working through many pods, which is what makes the reusable design worthwhile.
Why BestVapeAU
BestVapeAU is an Australia focused online product catalogue designed for individual customers, with a focus on clear information, straightforward pricing and easy navigation. We feature product information for brands such as IGET, HQD, RELX and BIMO, helping visitors explore different models, compare specifications and understand individual product options.
Because the biggest risk with any device and pod system is buying parts that do not fit together, every listing states plainly what it includes and what it is compatible with. We stock the range locally, sell from a single unit with no minimum order, and dispatch from our Australian warehouse, so restocking is quick and never waits on a long international delivery.
Common questions
Does this include a pod?
No. This listing is the device only and no pod is supplied. You will need a Bar Plus S3 pod or a BAR PLUS 6000 puff pod to use it. If you want the body and a pod together, choose the Kit listing instead.
Which pods fit this device?
It fits IGET Bar Plus S3 10000 puff pods and the earlier BAR PLUS 6000 puff pods. It will not fit a pod from another brand, so always match IGET pods to an IGET body.
How do I charge it?
Through the USB Type C charging port on the body. The smart screen shows the battery level as it charges, so you can see when it is full rather than guessing. No pod needs charging, since the power comes from the device.
Is it hard to set up?
No. Charge the body, click in a compatible pod, and take a few light draws so the coil settles. There are no buttons or settings, because the device activates automatically as you draw.
Why buy the device on its own?
It suits anyone who already owns pods and wants a fresh or spare body, since the consumable pod and the reusable device are bought separately. It is also the cheaper way to replace a body if your pods are still good.
How long does delivery take?
Orders ship from our Australian warehouse, so there is no international leg to wait on. Metro deliveries typically arrive within a few business days, with regional areas following shortly after.
Buy the IGET Bar Plus S3 Device in Australia
Ready to buy disposable vapes online in Australia? Visit BestVapeAU at bestvapeau.com to browse the IGET Bar Plus S3 device and pod range, compare options and order at straightforward pricing. Single units, no minimum order, and dispatch from local Australian stock so delivery is quick. If you already have pods and need a spare or replacement body, the device only listing is exactly what you are after.
This product is intended for use by adults aged 21 and over only. BestVapeAU ships from an Australian local warehouse with fast dispatch. Please vape responsibly and keep devices away from children and pets.
